Firmware CAC-1073

Updated on 10-07-2017 in Adapters and Cables
5 on 06-07-2017

Hi, Could you please send me a link to the latest firmware for the CAC-1073 – I’m struggling to get > 30Hz @ 4K on Windows 10 with latest Intel drivers, custom resolution with blank skipping set, 4K Wasabi Mango with HDMI 2 support etc.  Thanks,

  • Liked by
Reply
4 on 07-07-2017

Hi JimOCallaghan,

I will have [email protected] send you an email on this.

on 08-07-2017

Hi, Thanks for the quick turnaround – I updated the firmware to the latest but still can’t go above 30Hz.  From a scan through the forum it looks like I am hitting the HDMI 2.0 bandwidth limit because I can’t bring the colour depth down to 8bit.  Do you have any dealings with users who have managed to lower the colour depth on Windows 10 with Intel drivers?  The only option I have available is 32bit, with the latest Intel drivers.

on 09-07-2017

Actually managed to get to 60Hz using a Custom Resolution with the settings listed at <a href="http://insights.club-3d.com/thread/cac-1070-no-audio-at-4k60hz-with-intel-hd-4600-on-samsung-tv/#replies_10273″>http://insights.club-3d.com/thread/cac-1070-no-audio-at-4k60hz-with-intel-hd-4600-on-samsung-tv/#replies_10273 – thanks for the help, and the forum.

on 09-07-2017

In case anyone else stumbles across this thread and needs help I was able to get 4K 60Hz and 54Hz with the following driver / Custom Resolution settings:




on 10-07-2017

Hi JimOCallaghan,
Good to hear you got it going 🙂

Thanks a lot for the feedback.

Show more replies
  • Liked by
Reply
Cancel