Home › Forums › MST Hub – 3 touch monitors › RE: MST Hub – 3 touch monitors
that is not very likely. The OS of the system need to support MST. The CSV-5200 is able to receive 2 video (and audio signals) at ones and send that to the corresponding screen. With Screens with digital inputs that works easier/better because normally the system will automatically recognize the screens thru a “digital handshake”. When this is not done it depends a bit on how the systems reacts to “not finding a screen”. Windows for instance will normally always send a standard VGA signal even when no screen is detected. Not sure on how much bandwidth the “Touch” feature will take, but i think that normally goes over USB, so no influence on the MST HUB. The more inverter-boards/ splitters etc. you add, the more likely it is that some part of signal gets “lost in translation”.
2 CSV-1564W65 Blinking Monitors and USB Device Not Recognized
4 CAC-1010 and 2 Dell 3007WFP-HC monitors. 1 works, 1 doesn't
6 USB3.2 Gen1 Type-C to Dual Link DVI-D HDCP OFF version Active Adapter M/F for Apple Cinema
7 3D club
8 CAC-1531 USB Gen1 Type-C extension cable won't connect mouse and keyboard