Stefan75

Member since February 2017 · Switzerland

1 topic · 17 replies · 7 likes received

Recent posts

• Replied to CAC-1170 on HD4400 (intel NUC D34010WYB i3-4010U) 25 Aug 2017

  The 7th gen still need a onboard chip (LSPCON) to convert DP 1.2 to HDMI 2.0. But this works quite well. My ASrock mini ITX board has this too. Works fine with…

• Started Anyone doing UHD 60hz with NVS 310 or Quadro 410? 31 Jul 2017

  Both the NVS 310 and Quadro 410 have DP 1.2 outputs. Can the do UHD 60hz?

• Replied to Cannot connect with 422 and 10 bit color! 24 Mar 2017

  Hi, I don't know the 8000 series but on the 6/7000 I had to change two things to get UHD 60Hz 8bit 4:4:4 working:- enable 'HDMI UHD Color'- change the HDMI inp…

• Replied to CAC-1170 won't do 4:4:4 at 4K 15 Mar 2017

  Please check if your TV has the "HDMI UHD Color" setting. It enables UHD 60Hz 4:4:4. Unfortunately I remember reading the the 6070 series doesn't have this opt…

• Replied to CAC-1170 won't do 4:4:4 at 4K 15 Mar 2017

  My previous post is wrong, it can work.What TV are you using?

• Replied to Need Help - Cannot get 4K@60Hz 15 Mar 2017

  I just read your monitors manual... for UHD 60Hz you have to enable "HDMI ULTRA HD Deep Color".

• Replied to CAC-1070 and CAC-1504 issue with Blu-ray 3D 2 Mar 2017

  Yes, the Z270 seems to have the 1.61 firmware already. I updated my ASRock J3455-ITX with the flasher from the download section of the Fatal1ty Z170 Gaming-ITX…

• Replied to CAC-1170 on HD4400 (intel NUC D34010WYB i3-4010U) 1 Mar 2017

  I haven't used Linux for a long time, but I'm very interested to see if I can get UHD60 4:4:4 with it. What Linux distro/version would you recommend to test th…

• Replied to CAC-1070 and CAC-1504 issue with Blu-ray 3D 28 Feb 2017

  I don't know what they fixed with the firmware, but it didn't cause any new issues. I'm trying whatever I can to finally get UHD 60Hz 4:4:4.

• Replied to Possible solution to artifacts and flickering CAC-1070/1170 28 Feb 2017

  What video adapter and OS are you using?

• Replied to CAC-1170 won't do 4:4:4 at 4K 28 Feb 2017

  I have not found anyone that could successfully do 3840×2160@60Hz in 4:4:4 mode using Intel HD graphics over DP>HDMI 2.0.https://communities.intel.com/thread/1…

• Replied to CAC-1070 and CAC-1504 issue with Blu-ray 3D 28 Feb 2017

  Did you try the ASRock HDMI Firmware upgrader?

• Replied to How to I activate 4:4:4 to 4:2:0 downconversion on CAC-1070? 28 Feb 2017

  It all depends on the pixel clock. Doesn't Nvidia provide any detailed specs?

• Replied to CAC-1070 and Samsung UN65HU8550 28 Feb 2017

  The Beebox-S 7100U seems to have HDMI 2.0 and DP 1.2.Did you try both routes, HDMI directly and Club3D DP-HDMI?

• Replied to CAC-1170 on HD4400 (intel NUC D34010WYB i3-4010U) 28 Feb 2017

  If you could force the HD graphics to output YCbCr 4:2:0 then UHD 60Hz might work. But Intel hides those options... https://communities.intel.com/thread/111279

• Replied to Firmware 28 Feb 2017

  I checked the UN40KU6290 manual, after setting HDMI UHD color you should be ok. Are you sure you set your output to 8bit? You wrote you could do 4K 60hz RGB..…

• Replied to CAC-1070 Sound problem 23 Feb 2017

  What mainboard are you using?Maybe you can output the audio by spdif/optical..

• Replied to CAC-1170 on HD4400 (intel NUC D34010WYB i3-4010U) 23 Feb 2017

  Hi, the HD graphics 4400 is quite old, getting the UHD 60Hz 4:4:4 our will be very difficult. I have the HD 500 (Sept 2016), can do UHD 60Hz, but can't get 4:4…