CAC-1404 please help

Updated on 30-09-2026 in R9 380 Series
6 on 08-04-2026

bought the usb a extender and it does not recognize on my computer windows says code 43

 
  • Liked by
Reply
0 on 08-04-2026

tried every fix i found and nothing

  • Liked by
Reply
Cancel
0 on 13-04-2026

What are you connecting? Could you try following go to device manager and find the USB Device that belongs to it – go to Power management and Uncheck allow the computer to turn off this device. If this is not working – please see if you can go to same device and Uninstall Device. Windows will autodetect and reinstall whatever USB device is needed. USB devices are automatically installed but needs manual Uninstallation

  • Liked by
Reply
Cancel
0 on 24-08-2026

“CAC-1404 please help” immediately sounds like a post where someone is looking for practical guidance, and I think the most useful responses in situations like this are the ones that clarify the issue rather than making assumptions from a short code or reference number. Providing the exact context, symptoms, or error message can make it much easier for others to offer a helpful solution. Clear communication matters here, just as it does when using something like TextNow APK to reach someone for quick assistance. What exactly does CAC-1404 refer to, and what problem are you experiencing with it?

  • Liked by
Reply
Cancel
0 on 01-09-2026

If you mean the Club 3D CAC-1404 issue, I found the forum thread: it’s listed under the R9 380 Series.

  • Liked by
Reply
Cancel

I’ve run into a similar Code 43 problem with USB extenders before. In my case, unplugging the extender, restarting Windows, and installing the latest chipset/USB drivers fixed it. I also tested another USB port and removed the device from Device Manager before reconnecting it. If you’re using the Fnaf platform, its support or community area may have troubleshooting tips for your specific extender model. If nothing works, the cable or extender itself could be defective.

  • Liked by
Reply
Cancel

I’ve had a similar issue with USB extenders before. Windows showed Code 43, and the problem turned out to be either insufficient power or a faulty cable. Try plugging it directly into another USB port and updating the drivers. If it still isn’t recognized, contacting the seller for a replacement may be the best option. Thank you, admin, for sharing this.

  • Liked by
Reply
Cancel