@

gziele

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 14-05-2015 at 13:33 in reply to: Artifacts only after cold boot: R9 280X royalQueen #2267
    gziele
    Participant

    Windows, Bios, everthing is up to date. I even removed the bios battery to reset everthing to the default settings… RAM seems go be ok, memtest86 and windows memory diag showed no issues. As i said, when the system is cold start the artifacts are visible even on the short back screen of the video bios or when i boot from usb (for memtest)… at this point, no windows software could be the cause of the issue. Could be a faulty PSU the reason for this (even when the voltage on the 12v rail seems to be normal?)…

    12-05-2015 at 15:43 in reply to: Artifacts only after cold boot: R9 280X royalQueen #2255
    gziele
    Participant

    Also: In GPU-Z my default clocks are 1050/1500. Isn’t this higher than it should be for the 280x royalQueen?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)