Hello!
I am trying to setup a solution with a computer and 5 screens 1920×1080. I now have it working with two MST hubs connected directly to the graphics card and from mst to the screens and it works great! But i would like to have the computer in another room and use a long displayport cable to the Hub. Is this possible? It would be Computer>15m DP cable> MST Hub> Screens. I know its possible to have the MST hub plugged in to the computer and then use extenders to the screens but that looses the point if i have to run 5 display port cables or 5 Extenders to the screens…
- Liked by
Hello,
Thank you for your inquiry.
This will not work the connection would become highly unstable, even with an active repeater DP1.4 cable there is no guarantee it will work.
the only thing i know that Club3D has is an extension cable of 3meters
CAC-1023
and a Displayport 1.4 cable of 5 meters CAC-1060
https://club-3d.com/en/detail/2457/displayport_1.4_hbr3_8k_28awg_cable_m-m_3m_-9.84ft/
- Liked by
Hi…the Club 3D MST hub is a hub device that receives a DisplayPort™ 1.2 MST signal from the source device and splits up and routes the video streams independently to each display device. Using this type of configuration also allows the use of non DisplayPort™ 1.2 monitors. Non DisplayPort™ outputs, such as VGA, DVI or HDMI®, the Club 3D MST hub is DP++ and can actively convert the DisplayPort™ signal to the other types of display interface signals.
- Liked by
YOUR PREVIEW
0
0
