@

darksavior

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 21-06-2016 at 00:12 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #8280
    darksavior
    Participant

    [quote author="MST1407"]Hi all we have recieved a New firmware update we will send you by email.[/quote]

     Can you send it my way? thanks

    20-06-2016 at 21:22 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #8248
    darksavior
    Participant

    That was the first thing I did. I enabled UHD color and set input as “PC” to it uses 4:4:4 and reduced input lag. The cvt-reduced blanking custom resolution works but unfortunately that only works for the desktop and NOT post/bios/bootup or any fullscreen game. The games just won’t use that custom res. Borderless fullscreen works. I’m willing to try more firmware updates if more are coming out. Maybe you guys should have a sticky post with firmware updates so we don’t keep asking.

    25-05-2016 at 04:05 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #6342
    darksavior
    Participant

    Small update, the red screen is the cause of whatever colors are in the background. In my case, red. My conclusion is that the adapter just doesn’t support a lot of resolutions. The resolutions the BIOS/POST/BOOT are at and any 60hz resolution above 1080p in any game. Really disappointed.

    10-05-2016 at 12:26 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #5342
    darksavior
    Participant

    Thanks. I updated the firmware but there was no change. O well. Windowed/bordless mode will have to do.

    10-05-2016 at 11:02 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #5280
    darksavior
    Participant

    its only red on post and bootup. No message. Once it hits the welcome screen it’s totally fine and artifact free. I’m noticing fullscreen games won’t use the custom 4k res so it defaults to the normal one that gives me a black screen. on windows10. Can you email the firmware update to this profile’s email address? The support page doesn’t even list that cac-1070..

    10-05-2016 at 04:32 in reply to: CAC-1070 Not giving 60hz on samsung JU7100 tv with Gtx 770 #5245
    darksavior
    Participant

    I had to create a custom resolution with cvt-rb then it worked at 4k 60hz 4:4:4 RGB 8BIT
    I’m using a JU7100 40in (with input labeled as PC AND UHD enabled) with an EVGA 670 FTW with some generic 6ft hdmi cable.

    10-05-2016 at 02:37 in reply to: CAC-1070 and 1170 HDMI 2.0 adapter feedback topic. #5211
    darksavior
    Participant

    Hi, i got the CAC-1070 working at 4k/60hz/4:4:4 with CVT-RB but I get a red screen from the second I turn on my pc until the windows welcome screen. So I can’t go to bios unless I connect a pc monitor. Can a firmware update help?

    Specs:
    Samsung 40in JU7100 4k TV
    Asus Rampage IV Formula, boots with UEFI mode if it matters.
    EVGA Geforce 670 FTW

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)