Hi Daan,
Yes, we use their chipsets in several model. There are quite a few available chipsets but right now DisplayLink has the best option for USB driven graphics.
Boot into safe mode, deinstall the Catalyst driver, reboot again and go into safe mode, use DDU to remove all traces of the driver, reboot again and boot normal. Install Catalyst again.
Hi,
Go to your desktop, right click on the mouse and select screen resolution. Click into the display which you see probably 1/2 as a single screen for both and then below select multiple displays and change the configuration into extended.
Hi,
I do not have problems downloading the software. Do you have an antivirus software that is blocking the download?
Hi Richard,
On the MST Hub you have a white sticker attached with a code and firmware version. Can you tell me which version is it?
Go to your control panel
1. Go to programs and click uninstall a program
2. In your left column you have view installed updates, click that one
3. Check which update caused the problem you have.
Regards
Hi,
You can always go to windows restore and do it at an earlier point from the suspecting update or you can also de-install the update as well to see if you do encounter the same issue.
Hi Tomal,
Use this software to clean your system of Nvidia or AMD drivers. Also make sure that your anti-virus software is not active when installing the catalyst driver. Sometimes it gives problems when is active.
Hi,
You are fine with this power supply. It has a single rail design with 70.8A which is enough for a CrossFire configuration with the 290 cards.
Rail | +3.3V | +5V | +12V | +5Vsb | -12V |
Max output | 24A | 24A | 70.8A | 3.0A | 0.5A |
849.6W | |||||
120W | 849.6W | 15W | 6W | ||
Total | 850W @ +50C |
Regards
Hi,
What OS are you using?
Hi,
I am sorry I cannot help you there as I do not know which vendors sells in your local market.
I suggest to check on other local forums to verify which are the best options for you.
Regards
Hi,
Please make sure that your system is up to date. Download the latest Catalyst Omega drivers and if you can, clean your graphics drivers by deinstalling the catalyst and use the DDU software, you can find this in the forum.
Hi,
Are you overclocking the system?
Check if you can do a memtest to see if the memory is creating the randam crashes. Also did you update something that you can recall that is causing the problems?