[MST1407]

Sorry L24 not really no.
Did you try already loading a restore form before that lupdate that messed up your settings ?

[MST1407]

Hi Vliegelinsch,
I have been reprimanded by R&D 🙁
CSV-3242HD will not work on MacbookPro 2016 because the Chip Inside has no support for USB Type C / Thunderbolt 3.
Docking Products that do have such support and will work on your MacBook Pro 2016 are:
CSV-1560
CSV-1537
CSV-1534
CSV-1532
CSV-1530

Sorry for the inconvenience.

[MST1407]

As discussed with [email protected] unfortunately WMC7 does not support HDCP over the DP ouput 🙁

[MST1407]

I know many end users have AMD R9 series running with Vizio TV’s off a CAC-1070, working just fine. So that is not the issue here. Vizio TV’s after Frimware version 0x23 have not been any known combination issue with. That ould leave HDMI Cable and Crossfire …

[MST1407]

True you saw that correct.
However if we can test your patience a bit than we will be able to offer you something you might not have seen yet …

CSV-1474: http://www.club-3d.com/index.php/products/reader.en/product/usb-a-to-hdmi-20-dual-monitor-4k-60hz.html
or CSV-1477: http://www.club-3d.com/index.php/products/reader.en/product/usb-a-to-displayport-12-dual-monitor-4k-60hz.html

These products will work on any Host System with USB 3.0 port also MAC, and will enable you to connect 2 x 4K Screen at 60Hz to those systems !
Product are expected to become available second half of June.
Pricing should be about 100,- USD end-user without VAT for both.

This way you can use your system for years to come wihtout missing out on the new 4K screens at 60Hz 🙂

[MST1407]

ok well good to hear the Adapter is ok and sorry that your Graphics Card or Driver Software is giving you issues.
I am afraid i am not able to solve that for you 🙁

[MST1407]

We never stop looking for solutions at Club3D !
However this CAC-1070 Adapter is not your solution to achieve 4K 60Hz.
Your iMac has USB 3.0 ports right ?

[MST1407]

which apple adapter is that ?

[MST1407]

Hi Bullzie, that would depend on what outputs you have on your system.
Thundebolt 1 for video signal is the same as Displayport 1.1a which does not have enough bandwodth for 4K 60 Hz signal …
https://en.wikipedia.org/wiki/DisplayPort

So please please check if your system cna actually output 4K 60Hz … because i think not

[MST1407]

sorry to hear this. I mean i kow that Crossfire is sometimes a “pain” certianl yi ncombination with other devices especially when those are active. I was not aware that the drivers were still having such issues as you are having …
I will ask support to send you the latest firmware so that is up to date.

[MST1407]

pppfff well good you found it in the end !

[MST1407]

We also test on Thunderbolt 3 output of  a Dell XPS13 and those products all function without any issue.
What monitor you have ?

[MST1407]

you tried a clean driver installation already ?

Especially when using the upgrade feature to update drivers can give issues, because old files can remain in the registry of windows and can be “in the way”.

Please make a new clean driver installation to make sure that part is ok.

 Please uninstall the current Graphics driver and all related Graphics software like Afterburner/GPU-Z or whatever graphics related software you might have installed. Best way to remove Driver Software is to boot Windows in Safe mode, so the registry can also be cleaned. When your system does not allow you to do that, you can also use a program like DDU to remove such software: http://www.wagnardmobile.com/DDU/  

Reboot and manually download and install 16.8.3 graphics driver (don’t let auto installer from Windows do that). You can find that here: 
http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%2010%20-%2064&rev=16.8.3
or
a newer version if you prefer … (but please do not use any driver from 16.9.1 ~ 16.12.1); here you can find listing of drivers …
http://support.amd.com/en-us/download/desktop/previous?os=Windows%2010%20-%2064

 

[MST1407]

Good day Vadikcoma,

I don’t see any reason why you would not be able to get 4K 60Hz workign from your Dell 5520. If i am not mistaking you have a Thunderbolt 3 Output on this Notebook, so by using a CAC-1504 or CAC-1507, or CAC-1517 (depending on the input of the screen you are using) that should work just fine.

[MST1407]

Good day Mart,
With regards to the AMD Drivers, as Mikem87 already stated, with drivers 16.12.1 and later it all works fine again, nothing to to with Firmware of the Adapter. AMD also integrated the option to make a custom resolution again for those who need that to make it work.
What you mean by “can’t believe there is a single firmware from this card that is compatible” ?

[Author]

Posts