@

Paul

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 450 total)
1 2 3 4 5 6 … 28 29 30
  • Author
    Posts
  • 08-06-2015 at 09:14 in reply to: Will CGA-5452PLI work with UEFI secureboot? #2460
    Paul
    Member

    You are welcome

    08-06-2015 at 09:13 in reply to: Mini DP to HDMI Problem in Club3D R7-250. #2459
    Paul
    Member

    Thank you. Let me know if you have any other question.

    08-06-2015 at 07:37 in reply to: Mini DP to HDMI Problem in Club3D R7-250. #2455
    Paul
    Member

    Hi,
    Like I have explained, if you are using two passive and two active it should work, not sure why is not working in your case.
    If you use an active adapter it should definitely work.

    08-06-2015 at 07:36 in reply to: 290X Crossfire flickering #2454
    Paul
    Member

    The BETA was built to resolve some issues with some games and also to support FREESYNC

    06-06-2015 at 21:12 in reply to: Will CGA-5452PLI work with UEFI secureboot? #2445
    Paul
    Member

    Hi,
    Unfortunately the 5450 is not a UEFI compliant card.
    You need to boot the system under legacy mode.
    Regards

    06-06-2015 at 10:13 in reply to: CSV-5300H Issue #2442
    Paul
    Member

    The last thing is to service the MST Hub. Can you open an RMA to the shop where you bought it?
    If not please contact our [email protected]

    Enclose this thread so they know the story behind your MST Hub.
    Thanks.

    06-06-2015 at 10:10 in reply to: Mini DP to HDMI Problem in Club3D R7-250. #2441
    Paul
    Member

    You can use two active and two passive adapters. It also all depends on the resolution you are using. Lets say that you have displays that go above 1200p, then you will need active adapters.
    Viewsonic V3D231 both are 1080p (you can use two passive miniDP to HDMI™)
    acer AL1716 d-sub.DVI (here you can use active adapters)
    LG 16M65A I cannot find information but you can use here active adapters just in case.

    06-06-2015 at 10:05 in reply to: 290X Crossfire flickering #2440
    Paul
    Member

    Hi,
    Did you try and see if did resolve the problem?
    Also did you test the latest Catalyst Beta 15.5?

    05-06-2015 at 09:12 in reply to: 290X Crossfire flickering #2435
    Paul
    Member

    Do you have V-Sync activated in the game? Please check your game settings and place them in your Catalyst Control Center under gaming, click the add and place the game in there

    04-06-2015 at 09:15 in reply to: R9 290 royalKing – Installing drivers causing massive issues #2433
    Paul
    Member

    Hi,
    Can you have the card swapped by your shop? If not please contact us to [email protected] and please follow instructions with our support team. They will want to have the invoice of your card. Please tell them you are refereed by Paul at Insights and send them this link so they can follow your story.
    Kind regards

    04-06-2015 at 09:10 in reply to: 7850 maximum display support for two cards #2432
    Paul
    Member

    If you have 6 displays you can set 3 displays as extended mode and one eyefinity 3 for gaming, save this profile under catalyst. Then you can set another profile to set all 6 displays on Eyefinity 6. This way you can always run different profiles as you wish.
    You can Crossfire the cards if you wish.

    03-06-2015 at 10:15 in reply to: R9 290, strange screen at startup #2427
    Paul
    Member

    Hi,
    Please contact Gigabyte if they can provide you a new BIOS update or a solution. The BIOS is a bit old and I am quite sure they should have a BETA or another release that is not posted on the web.

    03-06-2015 at 10:11 in reply to: R9 290 royalKing – Installing drivers causing massive issues #2426
    Paul
    Member

    Hi,
    Check with Gigabyte if they can sort out something here.
    Regards

    03-06-2015 at 10:10 in reply to: theatron agrippa DTS PCI #2425
    Paul
    Member

    Can you detail what OS?

    03-06-2015 at 10:09 in reply to: AMD Radeon R7 250X Strange startup #2424
    Paul
    Member

    Hi,
    I think there is something wrong in the BIOS configuration or the boot sequence that is causing this behavior. 
    My suggestion is to take it to the shop where you bought it and explain them the problem you are having so they can fix it.
    Regards

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 450 total)
1 2 3 4 5 6 … 28 29 30