[MST1407]

ok. I know many MAC users use an app like SwitchResX to make a custom resolution on MAC OS …

[MST1407]

thanks for the feedback 🙂

[MST1407]

ok well good to hear you got it working 🙂 
thanks for the feedback

[MST1407]

rolling back to sierra is no option for you ?

[MST1407]

Good day asadilan,

Sorry to hear this.
No there should not be a separate driver installation needed, jsut the DisplayLink software should do.
Please do this:

Disconnect CSV-3103d from system.

First un-install all Displaylink software from your system.

Reboot.

Dowload and install latest available driver corresponding to your Operating system.

You can find latest driver here:

WINDOWS: http://www.club-3d.com/en/openpdfz/2403_1/zip/displaylink_sw_win_10_81_7_version_8.3_m0.zip/

MAC OS: http://www.club-3d.com/en/openpdfz/2403_2/zip/displaylink_sw_mac_os_x_10.12_11_10_version_4.0.0.zip/

When done reboot.

Now connect the CSV-3103D and it should function in a proper manner.

[MST1407]

Good day sencan,
Most recent Graphics Cards do support 6 Screens. Normally 4 of those you could connect direct to the Card and for 6 screen supprot you would need to make use of an MST Hub.
Since Your card has 2 DP1.2 outputs, you should be able to make use of 2 x CSV-5300H and connect 6 screens to that.
Since an MST Hub is an active device please make sure to use passive cables / adapters to connect the screens to the Hub.
Connect screens 1 by 1 and check if resolutions / frequency is set to 1920 x 1080 at 60Hz before connecting the next.

[MST1407]

Hi ost,

We have seen and heard that Active Adapters like our CAC-1070 do not work well together with all Kepler GPU based Graphics Cards. Our R&D did of course contacted Nvidia on the subject, but Nvidia is not “very open” to say the least, with regards to giving access/details to their drivers / software.
This is why we needed to add to the features of our CAC-1070 product that it does nto support Kepler GPU based Graphics.
Very sorry for the inconvenience.

[MST1407]

Hi michaelm,

That should work.
Did you check if the TV is still on “enhanced mode”?
Also we have heard of users needing to make a clean install of the SwitchResX version or even making a new user …

[MST1407]

Hi snova,
Nothing to be sorry about.
The CSV-1460 Docking I was referring to you can see as an USB Hub, an External Graphics (for 2 screens up to 4K 60Hz), usb sound card, usb network card … all together in 1 package.
You connect the Docking to the USB3.0 port to your MacBook and the screens to the DiaplyPort connector outputs on the Docking Station.
https://www.youtube.com/watch?v=gSoe0SDvoto

[MST1407]

What version of OS are you on now ?

[MST1407]

Hi snova,
Why would you not be able to use the USB 3.0 port of the Notebook ?
I mean I understadn it would prevent you from using it form something else, but this docking also generates 6 x USB 3.0 ports … so USB connectivity enough i would think …

[MST1407]

Good day BrianRayChen,

Sorry to hear this.
I will have [email protected] send you an email with link to the latest driver update for SenseVision products with Displaylink chip inside like your CSV-3242HDA.

[MST1407]

Good day snova,

The CSV-3203 is making use of Multi Stream Transport (MST) feature to distribute 2 incoming video signals form teh source system to the Screens. I am quite sure MAC OS does not support MST so it will only send out 1 video Signal which is why the hub just shows that on both screens.
I would advise you to use a CSV-1460 on a MAC Book Air early 2015.
http://www.club-3d.com/en/detail/2423/usb_3.0_dual_display_4k60hz_docking_station/
That has a Displaylink Chip iinside that will generate its own Video Signal outputs, so this way your dont have to depend on the MacBook air for that part. The CSV-1460 uses just 1 USB3.0 port and can output 2 x 4K 60Hz !

[MST1407]

Good day SgtUSMC,

Very sorry dfor the inconvenience
I will have that checked/fixed by the webmaster.
Meanwhile I will have [email protected] send you an email with active link to the driver.

[MST1407]

Hello Roberto,

We have heard of more compatibilty issues with new Apple hardware and certainly with the latests version of MAC OS.
Since you stated the CSV-2301 Gprahics Adapter is working fine on a different sytem, I will have [email protected] send you an email with the latest driver for MAC OS 10.13, just released now for Club3D products with Displaylink Chip inside. 

Sorry for the inconvenience

[Author]

Posts