[MST1407]

Hi gemini002, please check if your screen is set to run at 4:4:4 becuase if it does, you cannot go higher than 8Bit BPC when running is 3840x2160p at 60Hz, otherwise the signal gets too big for HDMI2.0
[img]http://insights.club-3d.com/wp-content/uploads/2017/03/WHAT-4K-IS-SOUPPORTED-BY-THE-ADPATER-1.png[/img] 
With regards to the HDR support. i am not sure if this support can be added by firmware update, but as soon as i get info on that we will update on this.

[MST1407]

Good day D1iamond,
Sorry to hear this. 

The CAV-1534 is Plug and play and does not require driver installation.
To be able to send a video signal over USB Type C output, this TYpe C output needs to support DisplayPort Alternate (Alt) Mode. Looking at the MSI website, it does not look like it does, but please check that because without  the USB Type C output supporting Displayport Alt Mode, it will never work.
The CSV-1534 does not have a Displaylink GPU inside, so that software will indeed not help.
What is it that you all want to be able to connect to your notebook ?

[MST1407]

Hi Maximwertt.

That driver is very new for the card you have. 
I would try something like 16.8.3, that is the latest before they started adjusting the drivers for 400 series.
http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%2010%20-%2064&rev=16.8.3
Dont get me wrong i am not saying it will not work with 17.3.3, but we have not tested that.
With regards to the cable adapters I was wondering … If you do not now the brand or type of the DP to HDMI cables you have, how do you now if the are in fact active and have eyefinity support ?
What setup are you making with the screens 2 rows of 3 next to each other in lanscape ?

[MST1407]

That is indeed a nice Screen, but please cjeck with LG if it can do 4K in 30Hz.

[MST1407]

Hi Gizzmo and Stefan75,
I will ask support to send you latst available firmware for cac-1070 / cac-1504 (use the same firmware. That might help with Kabylake platform

[MST1407]

Both you can chose to set the screens as “Extended” and place individual windows on each, or chose to make an SLS with the AMD Driver or i believe it is called “Eyefinity Group” in the AMD Software.
Which Cables/Adapters are you using (brand/type?)
Which driver version are you currently using ?

[MST1407]

Hi Ericovk,
Got feedback for you. Tested with Macbook pro 2015 with sierra on it.
First un-installed Displaylink software that was already on it and reboot.
Downloaded and installed Displaylink driver from Club3D site version 3.0 and reboot.
Connected CSV-2302 to Samsung Monitor with DP Cable and then to MacBook Pro adn got a picture.
Tested 720p, 1080p, 1440p, 2160p, all working fine. No noticable mouse lag. Working just fine.

What LG screen do you have ? Is it capable of doing 4K at 30Hz ? not all screens that can do 4K at 60Hz can also do that at 30Hz …

[MST1407]

Hi Ericovk,
Got feedback for you. Tested with Macbook pro 2015 with sierra on it.
First un-installed Displaylink software that was already on it and reboot.
Downloaded and installed Displaylink driver from Club3D site version 3.0 and reboot.
Connected CSV-2300 to Samsung Monitor and then to MacBook Pro adn got a picture.
Tested 720p, 1080p, 1440p, 2160p, all working fine. No noticable mouse lag. Working just fine.

What LG screen do you have ? Is it capable of doing 4K at 30Hz ? not all screens that can do 4K at 60Hz can also do that at 30Hz …

[MST1407]

i will keep you all posted in teis threat if we have any news on this

[MST1407]

Hello Luca and welcome 🙂

[MST1407]

ok, now you are on 0x46, good to hear it works for you now.
Tkanks for the feedback.

[MST1407]

yes it should work indeed, lets first try the firmware update … i think that will help

[MST1407]

Hi markopletty,

Sorry to hear this.
Yes the picture quality should be as good as a direct hdmi connection.
I will ask [email protected] to send you latest firmware for the adapter.

[MST1407]

Good day maximwertt,

In general:
A HD7850 card will standard support 2 screens, if you want to connect more screens you will ned to enable the “Eyefinity” feature, you do that by using (one of) the DP ouputs of the card. In this thats an easy one 😉
When using screens with DP input, you can just connect with “normal” or “passive”adapter / cables. When using screens without DP input you will need active adapters/cables with eyefinity support from the 3rd screen onwards.

So for use of screens without DP input it should be like this:
Screen 1: Connect with “normal/passive” adapter / cable
Screen 2: Connect with “normal/passive” adapter / cable
Screen 3: Connect with active adapter with eyefinity support + normal HDMI cable
Screen 4: Connect with active adapter with eyefinity support + normal HDMI cable
Screen 5: Connect with active adapter with eyefinity support + normal HDMI cable
Screen 6: Connect with active adapter with eyefinity support + normal HDMI cable

Active Adapter with eyefinity support:
CAC-1170 = Mini DP to HDMI 2.0 Active Adapter with eyefinity support
http://www.club-3d.com/index.php/products/reader.en/product/mini-displayport-12-to-hdmi-20-uhd-active-adapter.html

[MST1407]

Hi Ericovk, 
Sorry but i do nto have feedback for you yet and if that is not bad enough … i will only have it for you not tomorrow but on wedensday.
Sorry for the delay

[Author]

Posts