[MST1407]

Hi Survient,
Yes that BGAX-R7366M6 exists. Indeed a R7 360 with 6x Mini DP Ouput.
This is a design form the Embedded Department and inteded for special project. Only a very little amount have found their way into distribution channel and i would be surprized if those are still available. Club3D does not offer those anymore other than for special integration projects.

[MST1407]

yes that should work just fine

[MST1407]

working on it … will keep you posted here

[MST1407]

good to hear you got it to work 🙂

[MST1407]

Hi Vojislav, sounds should also work …

please check if there is a driver update aivailable for the Graphics Card, often there is also UHD sound driver in those Driver packs.

Some feedback …

Make sure your MacBook is post mid 2010, the earlier MacBook models do not support audio output through its mini DisplayPort.

System Preferences > Sound. There are 3 tabs in the window; Sound Effects, Output and Input. Be sure you are on the Sound Effects tab. Middle of the window select your TV where it says “Play sound effects through:”.

Select the middle tab named Output.

Select your TV from the drop-down list next to HDMI, below where it says “Select a device for sound output”.

Using either Finder or Launchpad go to Applications > Utilities > Audio MIDI Setup.

On the left-hand side of the window you should now see HDMI. In the middle of the window, on the Output tab, where it says “Source:” select your TV from the drop-down list.

If you CANNOT see a speaker icon next to HDMI in the list on the left, do the following:

Bottom left of the window select the wheel icon with the down-pointing triangle. Make sure that sound output is selected and that you can now see a speaker icon next to HDMI in the list of devices.

If you still cannot hear sound, Turn everything off , power tv first and then Mac.

[MST1407]

I suggest to claim warranty from the place of purchase …

[MST1407]

for sure i will 🙂

[MST1407]

yes it does 🙂

[MST1407]

at 4:2:0 it should be possibel to do 12 bits BPC in 4:4:4 however you cannot go higher than 8 Bits BPC otherwise the signal gets to big

[MST1407]

[img]http://insights.club-3d.com/wp-content/uploads/2016/11/Checklist-CAC-1070-CAC-1170-180816.jpg[/img]

[MST1407]

On the TV;
* Set Edit Device Type to PC 
* Please use TV’s  HDMI (MHL) port for HDCP 2.2 protected content.
* HDMI UHD Color Allows you to set the HDMI UHD Color mode to On or Off for each HDMI connector on the TV. When set to On, the TV optimises processing of UHD 50P/60P signals.

For setup with TV it normally works best to make a custom resolution for 3840x2160p at 60Hz with Timing Standard set to CVT-Redeceud Blanking (RB). Since MAC OS X does not give you that option, you will need a program like SwitchResX to do that.

[MST1407]

Hi Axel89,

The chipset inside is Parade PS176 which does support HDMI2.0a (HDR).

However since we did not done testing this, we do not officially communicate this, it is very well possible that we will need a firmware update for this to work In a proper manner.

So yes the hardware is compatible, but most probably need a software/firmware update for that to work. I estimate testing to be done by end this year.

[MST1407]

Hi Soulgank,
What driver version you have running now ?

I know that most setups with TV work best when making a custom resolution for 3840×2160 at 60Hz with Timing Standard set to CVT-Reduced Blanking.
With all AMD Drivers after 16.8.3 this will be a problem because i think AMD just took that option out for all drivers after that !?!?

I case you are running a newer driver thatn 16.8.3, please ininstall that end instead use 16.8.3, you can find that here:
http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%2010%20-%2064&rev=16.8.3

From 16.9.1 onwards AMD made many chages for RX400 series but very liitle to none for previous generations GPU’s so even with that “older” driver you are not missing much …

 

[MST1407]

Good that it works for you again.
And yes please be carefull with those auto updates …

[MST1407]

answered by [email protected]

[Author]

Posts