[MST1407]

Hi 4k4sure,
Cable looks ok to me.
What error does SwitchResX give you (or your system) ?

[MST1407]

Hi Jordan, good to hear it is working for you 🙂

[MST1407]

[img]http://insights.club-3d.com/wp-content/uploads/2016/06/WHAT-4K-IS-SOUPPORTED-BY-THE-ADPATER-1.png[/img]

To allow support for 4k@60Hz at 4:4:4 the Bits per Color needs to be at 8Bit otherwise the signal gets bigger than HDMI2.0 has bandwidth for. So that Crimson driver most probably just jumps automatic to 8bpc and does not allow you to change.

[MST1407]

Hi Akinwale1

Club3D Displayport to HDMI2.0 adapter is not bi-directional.
It converts a signal coming from Displayport output source, into an HDMI Signal to connect to TV. If i understood correctly you need it the other way around, but we unfortunately do not have a solution for that.

[MST1407]

Hi Adam,

What system do you have and which Graphics is inside ?

[MST1407]

will send you the supported Pixel Frequencies by email so you can check if that is in line with your screen.

[MST1407]

Hello go4zee,

You want to connect 2 x CSV-3103D to 2 different USB3.0 port on you PC and connect a 2560x1080p screen ot each of the Docking Stations ? Yes that is possible.
And i don’t see why connecting an other screen to the HDMI Ouput of the Grpahics Cards would be an issue either. That should work.

[MST1407]

Hi Marios50, 

The HDCP protection needs to be able to establish that both source and destination device,
ín this case Shield and TV, are HDCP2.2 compliant. The Adapter can handle that HDCP signal
in both 1.3 and 2.2, so it will not be “in the way”, but it will not make your screen/tv hdcp 2.2 compliant.

[MST1407]

Good day DaveWing,
Club3D Displayport to HDMI2.0 adapter is not bi-directional.
It converts a signal coming from Displayport output source, into an HDMI Signal to connect to TV. If i understood correctly you need it the other way around, but we unfortunately do not have a solution for that.

[MST1407]

Hi Hansge,
i know that DisplayLink just came out with a Beta Driver for WIN10 … 
Before installing that however please first un-intall the old one.
http://www.displaylink.com/downloads/windows

[MST1407]

Hello jcferraz,

Samsung TV often need to be set to “PC” for the HDMI you use to connect to the PC.
It is also often needed to set the TV to UHD Color.

Waht brand/type HDMI Cbale are you using ? or in ither words, you sure that one is capable of supporting 4K 60 Hz or 18Gbps ?

[MST1407]

Hi all we have recieved a New firmware update we will send you by email.

[MST1407]

Send by emai from [email protected]

[MST1407]

No thanks, happy you got it working  🙂

[MST1407]

I ma assuming you do not turn of the screen with power button. Could you please try to turn on System first and than the screen

[Author]

Posts