[MST1407]

Hi Miko they are both designed for the same purpose – to support DP1.4 signals and output up to 8K60hz Resolution. The CAC-1060 is 3meters and the CAC-2068 is 2meters other than this and the packing and the pricing they are the same.

[MST1407]

Hi Entwineryche, can you send a mail to [email protected] to get an update on the firmware thanks 

[MST1407]

Hi Speed6 can you send a mail to [email protected] they will provide you with an updated firmware for this dock with this Notebook 

[MST1407]

What about connecting it without the TX-NR555 receive in between does the adapter work? 

[MST1407]

Hi Costersall, Indeed both adapter should be able to support the described specs. what is the display that you are using? 

[MST1407]

Hello Yseanlin, could you please send a mail to [email protected] Im sure they will help you with what you need. 

[MST1407]

Hi Yseanlin – all products sold by Club3D carry a 24months warranty.  You can always contact them at [email protected]

[MST1407]

Hello George,

I hear support at Club3D has given you a response – please let me know if you have not got it. thanks 

[MST1407]

 Thank you for the update and good to read its solved.

[MST1407]

Hi Palinkat, please make sure you have the latest drivers for the Nvidia driver installed and see if you can also update the latest firmware of the CAC-1070 which you can find in our website https://www.club-3d.com/en/detail/2366/displayport_1.2_to_hdmi_2.0_uhd_active_adapter/

under downloads please keep us posted on the outcome. thank you 

[MST1407]

Hi Ruben, have you tried updating the monitor driver in your system for the third screen? for further support please send a mail to [email protected]

[MST1407]

Hi JBolender 123,

we would need to have more information to be able to offer support. Can you please send a mail to [email protected] 

Have you updated latest nvidia drivers? Please specify

Custom resolution did you lower monitor resolution to 59Hz?

Have you disabled HDR on windows?

Latest windows update? please specify.

Can you specify which PSU you are using? 

Thanks 

 

[MST1407]

That is 1920x1080p

[MST1407]

Q1 Hi Azul for three screens you need to lower to 1080p. The resolution you are taking it’s using all the available bandwidth.
More than 6 screens can be used if the software allows it.

[MST1407]

Hello Azul, 
Q1 -can you give the resolutions you are using? https://www.club-3d.com/en/technology/14/sensevision_possible_resolutions/
Q2 – One GPU will support max of 6 displays. The MST hub will support 2 passive outputs + 4 active 
Please note that Eyefinity will only support up to 6 screens even when you use two GPUs. The management of the screens will be limited by the software. 
 

[Author]

Posts