[MST1407]

indeed, that wont work. USing only video output means it has to clone the image, meaning the 2 outputs will be indentical, so if the 1st is 144Hz the second one will be that also… 
Sorry :-S

[MST1407]

When the 1080p is connected to the card directly it should be possible with only the 144Hz screens connected to the MST HUB. All screens connected to the MST Hub will not go …

[MST1407]

Sorry for the late reaction Wazer.
I checked with R&D and yes 2560x1600p at 144Hz will work on an MST hub

[MST1407]

Hello my3D,

The White with Red box is the new packing, where the back verison is the “old”,bu thte product CSV-5200 indeed is the same.
Max Resolution for 1 screen = 3840 x 2160p at 60Hz
Max Resolution for 2 screens = 2560 x1600 at 60Hz
A CSV-5200 can do stream cloning. meaning it can copy a single video signal 4K60Hz to 2 different outputs, but it will be the same signal (mirror) only.

Hope that clears it up for you.

[MST1407]

Hi Xumarice,
I tested with Intel Graphics Driver pack 15.40.25.4463, I know it is not the latest, but It
worked very well for me where i also had sounds issues with newer drivers.
Please also check for Software update for your HiSense TV.

 

[MST1407]

Good day joevt,

Good question and thanks for that 🙂
And i think you are correct, this CAC-1507 is not an Active Adapter, it does support 4lanes DP 1.2, but does not convert anything, so no need to be active.
In general with regards to adapters, they are called passive when they just change the gender or connector but no signal conversion tkaes place. When signal conversian does take place the adapter will need to have a receiver and transmitter chip inside which would make it called “active”.

 I will have that CAC-1507 descition adjusted. Thanks and keep up the “sharp eye”

[MST1407]

Hi Joevt, that sounds great !
I am not in the R&D Team, so i cannot tell you “how difficult it is to convert a 2 lane Dp 1.3 into a 4 lane DP 1.2”. But my logic would be, that if that was really all that easy they would be available already …

[MST1407]

Hello Xumarice, which CPU you have in the system ?
We do have newer firmware, however i am not convinced this will solve your issue, i will have that send it over by email from [email protected].
With TV’s it normally works best to make a custom resolution for 3840x2160p at 60 Hz with Timing Standard set to CVT-Redeced Blanking (RB). You will have to make that in the Intel Control panel advanced settings first for the correct screen, before you will be bale to select that option. Sometimes also requires a reboot.
What Graphics Driver version are you using ?

[MST1407]

Hi 4k4sure,

It sounds like the system is not recongising the CSV-1534.
Please try to connect the CSV-1534 plus monitor and turn monitor on. Then first reboot the MAC. It should recognize everything then …

[MST1407]

Hi Sixo,

A USB type C output does not necessarily supports output for video signals. The output will need to have Display Alt Mode support for that to work. Your MacBook Pro has Thundelbolt3 which has full support for Displayport, so that is not the the problem.
I saw in the specs;

Native Resolution

4K 3840 x 2160 (DisplayPort: 60 Hz, HDMI: 30 Hz).
Please connect the CSV-1534, connect screen and turn it on. Then please reboot the MAC, it should not recognize the screen. However i dont think your screen supprot higher then 30Hz in 4K over HDMI.
Perhaps you can better use a CAC-1507 USB Type C to DP1.2 Adapter plus a CAC-1163 DP-to-MiniDp 1.2 Cable to get 4k60Hz to your screen. You will probably need to enable DO1.2 in the settings for your screen first …

[MST1407]

extended desktop, ja dat werkt

[MST1407]

Yes it does, however limited to the bandwidth of dp1.1. 1080p at 60Hz takes Aboutaleb 3.73 Gbps , so more toen 2x 1080 p at 60Hz wont fit

[MST1407]

Hi David,

Are you sure that your Notebook ( i assume) has support for DP1.2 output ?
If it is DP1.1 that would explain why you don’t get more than 2 x 1080p over it …
Also many Notebooks have limitation with regards to the amount of external screens you can connect. Often not more than 2 external screens is supported so 3 in total including the Notebook screen.

[MST1407]

Hallo TheoR,

Omdat de schermen 1920x1080p 60Hz native zijn, maakt het niet zoveel uit want alle uitgangen van de VGA Kaart kunnen dat doen. Ik zou wel aanraden om beide schermen op een zelfde manier aan te sluiten ten einde zo min mogelijk verschil tussen beide te hebben. Als je al DVI Kabels hebt kan je die gewoon gebruiken zonder bang te hoeven zijn dat dit minder kwaliteit zou opleveren, als die kabels goed zijn is dat zeker niet het geval.

[MST1407]

I would say a CAC-1507 = USB Type C to DP1.2 (Thunderbolt 3 Compatible)
plus a CAC-1163 = Mini DP to DP 1.2 Cable 2 Meter (Bi-Dir) 21.6Gbps
or CAC-1064 = DP1.2 Cable 3 Meter 21.6Gbps
http://club-3d.com/index.php/products/reader.en/product/club-3d-usb-31-type-c-to-displayport-12-uhd.html
http://club-3d.com/index.php/products/reader.en/product/mini-displayport-to-displayport-cable.1788.html
http://club-3d.com/index.php/products/reader.en/product/displayport-cable-ver-12.html

[Author]

Posts