[Baak]

Hi Achilles99,

Can you try and downgrade your Nvidia drivers to 456.38 and see what happens?

How long are the cables you are using? In combination with the CAC-1085?

Even then, I think that 12K120Hz is not possible over the 3090… Might be an option to ask this question on the EVGA forums as well.

[Baak]

Hi Alfuzzy,

Why fix something that works? Is what I always ask myself. So stick with it, I’d say.

There is a firmware update to turn it off and on again so no need to purchase a new one. You need to mail [email protected] for it. Contact them once you feel like it doesn’t work for you like it should.

[Baak]

Hi Woller,

No problem, happy to help! 🙂

[Baak]

Hi Elperdano,

No It does not support Free-Sync. You might need to use the CAC-1080 with a propper HDMI 2.0 cable.

But let me try and help you, what Display are you using? Not every FreeSync Display supports FreeSync of HDMI.

[Baak]

HI Elperdano,

The CAC-1073 can do what you ask.

[Baak]

Hi Wolfenhex,

Ok I understand now. What hardware are you trying to use to mirror into 3 displays? This way I might be able to figure what’s wrong. Also if possible please show me your display settings.

Thanks!

[img width='' height='']http://insights.club-3d.com/wp-content/uploads/2021/01/DIS-1.jpg[/img]

[img width='' height='']http://insights.club-3d.com/wp-content/uploads/2021/01/DS2.jpg[/img]

 

[Baak]

Hi Woller,

The issues is with your notebook. It does not support Display Alt mode over USB-C. Read the manual.

https://www.asus.com/Laptops/For-Home/ZenBook/ZenBook-14-UM433-4000-series-Ryzen/HelpDesk_Manual/

[img width='' height='']http://insights.club-3d.com/wp-content/uploads/2021/01/Asus.jpg[/img]

https://www.club-3d.com/en/technology/15/usb_c_over_alt_mode/

You will need something like the CSV-1460 or look for Dockings with “DisplayLink”  in the name.

[Baak]

Hi ApricotObject7,

What hardware do you use, which cable did you extend?

[Baak]

Hi Meagle1223,

That’s correct any DP 1.4 cable will work. I don’t now how much longer you need but Club-3D has a cable up to 20 meters it’s Active Optic (fiber) CAC-1079. Or a normal cable up to 5 meters CAC-1061. Just be sure it’s a DP 1.4 cable and also check your GFX supports DP 1.4.

[Baak]

What source (GFX) will you use with mini DP? Will it be DP1.4? Very curious

[Baak]

Hi Supernan,

Please send [email protected] an email they will help you with this issue.

 

[Baak]

Hi Clownabhi,

Try to contact [email protected]

Good luck!

[Baak]

Hi Wolfenhex,

I’m trying to puzzle what you are trying to ask. But I can’t figure it out.

Mirroring, Identical signals and Duplicated are all the same thing to me, but I still don;t understand what you are trying to ask. Can you try and rephrase your question?

Also mention the hardware you are using.

Thanks!

[Baak]

Hi Brett,

Have you unzipped the file before trying to use the .exe file? Save it on your desktop and use it as an administrator.

Is the CAC-1510 attached to the computer? You must connect it to the DVI as well.

Hope this helps.

 

[Baak]

Ok your TV does support 4k60Hz over HDMI 2.0. That’s good.

HDMI 2.0 came out in September 2013. So there is a chance you bought a late HDMI 1.4 cable. Which does only allow 4K60Hz on the following settings; Colors 420 and 8 bit.

However I don’t know if the CAC-1080 is backwards compatible.

[Author]

Posts